BORON OIL
It is a multi-purpose cutting and metalworking oil that is used in the processing of various metals and gives an emulsion when mixed with water. It has lubrication and cooling feature. It ensures that the surfaces are clean and smooth. It contains additives that prevent bacterial growth. It is durable and rust-proof.
Before using the newly prepared emulsion, it is important to ensure that the bench chamber is cleaned and/or cleaned in terms of emulsion efficiency and longer use. It is recommended to ensure uninterrupted operation of the cooling and circulation system of the emulsion chamber, and to regularly check the chamber filters and replace them with new ones periodically. Skid oils used in bench slides should be prevented from mixing into the emulsion reservoir.
BORON OIL S
It is a metalworking oil produced with high-tech additives that give emulsion when mixed with water, used in the processing of various metals. It has superior lubricating, cooling and washing properties. It contributes to increase the surface quality and pen life in the processing of hard materials under heavy working conditions. It contains additives that prevent bacterial growth. It is durable and rust-proof. It contributes to the working comfort with minimum smoke during operation.
Before using the newly prepared emulsion, it is important to ensure that the bench chamber is cleaned and/or cleaned in terms of emulsion efficiency and longer use. It is recommended to ensure uninterrupted operation of the cooling and circulation system of the emulsion chamber, and to regularly check the chamber filters and replace them with new ones periodically. Skid oils used in bench slides should be prevented from mixing into the emulsion reservoir.
CUTTING OIL 311
It is a metalworking oil used without mixing with water. It has been developed to be used as cutting oil in machining with high technology special additives and very well refined quality base oils. It is specially blended for very fine metalworking operations such as honing, rectification and running-in of ferrous and non-ferrous metals, especially aluminum and magnesium alloys. It serves as an excellent cutting, cooling and washing function in deep drilling of soft materials with very light machining, but in high-speed milling and honing operations. Does not contain chlorine. Does not stain or tarnish. It does not cause high evaporation and smoke formation.
CUTTING OIL 322
It is a metalworking oil used without mixing with water. It has been developed to be used as cutting oil in machining with high technology special additives and very well refined quality base oils. It contributes to the formation of excellent surface quality by facilitating the machining and cutting processes of all kinds of hard steels. Thanks to the special additives it contains, it facilitates drilling, cutting and surface treatment processes and increases the life of the metal processing equipment used. It is suitable for use on all materials where staining is not a problem.
CUTTING OIL 911
It has been developed for heavy operations such as cutting, surface treatment and especially deep hole drilling of all kinds of hard steels, blended with advanced technology special additives and high quality special base oils. It can be used safely as cutting and cooling fluid in drilling and machining operations of various types of steels, including special alloy steels. Thanks to the high pressure additive in its content, it facilitates cutting and drilling operations at different processing speeds and large size chip removal, and helps to create excellent surface quality. Since it is suitable for working at high speeds, it contributes to increase process efficiency and increase the life of metal processing equipment used. Due to the high pressure additive in its content, it can stain copper and alloyed yellow metals.
SEMI-SYNTHETIC METALWORKING AND COOLANT
It is a water-based metalworking cutting and cooling fluid developed to be used in machining of carbon steel, cast iron, aluminum, stainless steel, yellow metal alloys such as drilling, cutting, honing, thread cutting and grinding, especially grinding and reaming. It has been formulated with new technology additives to be used in post-processing operations where surface quality is important, in difficult operations where high pressure is required, and especially in operations that require lubrication with cooling. Excellent corrosion prevention, low foaming, hard water stability, high dust, dirt, oil etc. It has the properties of pushing foreign materials from its body.
Assuming that the water of the area of use is of medium hardness: 4% to 6% product + water emulsion for general purpose uses, 3% to 4% product + water emulsion for surface grinding operations, 5% to 8% product for deep cutting of hard materials With + water emulsion, 6% to 10% product + water emulsion is prepared and used successfully, depending on the properties of the processed material, for sensitive surface in all kinds of heavy operations.
FULLY SYNTHETIC METALWORKING AND COOLANT
It is a fully synthetic metalworking oil formulated with state-of-the-art additives for all drilling, honing, threading, lapping and rectifying operations of carbon steel and stainless steels and other metalworking operations with light chip removal. Excellent corrosion prevention, low foaming, hard water stability, high dust, dirt, oil etc. It has the properties of pushing foreign materials from its body.
It can be made ready for use in clear and transparent appearance by mixing 2% to 5% M Oil Synthetic Boron Oil with 98% to 95% water. Refractometer Factor: 2.32
SYSTEM CLEANING
DISINFECTANT
M Oil System Cleaning Disinfectant is a shock effective disinfectant formulated to purify central systems, counter and chamber, cooling lines from oil, dirt, microorganisms and filth. It is used by preparing a solution between 1% and 3% according to the pollution level of the environment and the system. By using an aqueous solution prepared by adding 1% - 3% to water, cleaning and disinfection of flat surfaces is carried out with a brush, in the form of spraying where brushes will not enter, chamber and pipelines by circulation.
Dirty or damaged cutting fluid in the system to be cleaned with M Oil System Cleaning Disinfectant is discharged. The tank of the bench is cleaned of accumulated sediment and dirt. After preliminary cleaning, fresh water is placed in the tank and 1 - 3% of the volume of M Oil System Cleaning Disinfectant is added. The machine is started and allowed to circulate for a few hours. The circulation time is reduced or increased according to the amount of disinfection used and the pollution status of the system. Then the tank is emptied, cleaned, rinsed with clean water and made ready for use.
SURFACE PROTECTION OIL
It is a formulated protection oil that prevents corrosion of all kinds of metal material pipes, shafts, gear machinery parts that are not directly exposed to ambient conditions. It has high area coverage, maximum water repellency, high resistance to moisture and acid vapors. Protecting the surfaces with M Oil Surface protection oil, all kinds of dust burrs, oil, grease, water, dirt and so on. After cleaning it from foreign materials, it is applied by brushing, spraying or filling in the form of a bath. Oily surfaces can be easily cleaned with any degreasing material.
